Viewing Switch Licenses and License Restrictions

To view the current license information for a node, log into that node and enter the show licenses command.
The command display is similar to the following:
```
Slot-1 Stack.1 # show licenses
Enabled License Level:
Advanced Edge
Enabled Feature Packs:
None
Effective License Level:
Advanced Edge
Slot-1 Stack.2 #
```
The Enabled License Level is the purchased license level. This is the maximum level at which this node can operate without purchasing a license level upgrade.

The Effective License Level is the operating license level. If a license level restriction is configured for this node, the effective license level may be lower than the enabled license level. All master-capable switches must be operated at the same effective license level.

On the master node, run show stacking configuration to view the license level restrictions configured for all nodes in a stack.

Slot-1 Stack.33 # show stacking configuration
Stack MAC in use: 02:04:96:26:60:DD
Node               Slot         Alternate          Alternate
MAC Address        Cfg Cur Prio Mgmt IP / Mask     Gateway         Flags     Lic
------------------ --- --- ---- ------------------ --------------- --------- ---
*00:04:96:26:60:DD 1   1   Auto 192.168.130.101/24 192.168.130.1   CcEeMm--- Aa
00:04:96:26:60:EE 2   2   Auto 192.168.130.102/24 192.168.130.1   CcEeMm--- Aa
00:04:96:26:60:FF 3   3   Auto 192.168.130.103/24 192.168.130.1   --EeMm--- Aa
00:04:96:26:60:AA 4   4   Auto 192.168.130.104/24 192.168.130.1   --EeMm--- Aa
00:04:96:26:60:88 5   5   Auto 192.168.130.105/24 192.168.130.1   --EeMm--- Aa
00:04:96:26:60:99 6   6   Auto 192.168.130.106/24 192.168.130.1   --EeMm--- Aa
00:04:96:26:60:BB 7   7   Auto 192.168.130.107/24 192.168.130.1   --EeMm--- Aa
00:04:96:26:60:CC 8   8   Auto 192.168.130.108/24 192.168.130.1   --EeMm--- Aa
* - Indicates this node
Flags:  (C) master-Capable in use, (c) master-capable is configured,
(E) Stacking is currently Enabled, (e) Stacking is configured Enabled,
(M) Stack MAC in use, (m) Stack MACs configured and in use are the same,
(N)  Stack link protocol Enhanced in use, (n) Stack link protocol Enhanced configured,
(i) Stack MACs configured and in use are not the same or unknown,
(-) Not in use or not configured
License level restrictions: (C) Core, (A) Advanced edge, or (E) Edge in use,
(c) Core, (a) Advanced edge, or (e) Edge configured,
(-) Not in use or not configured

License level restrictions appear in the Lic column. The license level restriction in use appears first, represented by a capital letter as shown in the display legend. The configured license level restriction appears second, represented by a lower-case letter. When the letters in the Lic column are different, for example Ae, the node is configured with a different license level restriction than the one that is currently in use.

To put the configured license level restriction into effect, you must reboot the node.

Published March 2020prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback