The following tables, groups, and variables are supported in this MIB.
| Table/Group | Supported Variables | Comments |
|---|---|---|
| RFC 4363 dot1qBasegroup | dot1qVlanVersionNumber |
The version number of IEEE 802.1Q that this device supports. Read-only access. |
| dot1qMaxVlanId |
The maximum IEEE 802.1Q VLAN (Virtual LAN)-ID that this device supports. Read-only access. |
|
| dot1qMaxSupportedVlans |
The maximum number of IEEE 802.1Q VLANs that this device supports. Read-only access. |
|
| dot1qNumVlans |
The current number of IEEE 802.1Q VLANs that are configured in this device. Read-only access. |
|
| dot1qGvrpStatus |
The administrative status requested by management for GVRP. The value enabled (1) indicates that GVRP should be enabled on this device, on all ports for which it has not been specifically disabled. When disabled (2), GVRP is disabled on all ports, and all GVRP packets is forwarded transparently. This object affects all GVRP Applicant and Registrar state machines. A transition from disabled (2) to enabled (1) causes a reset of all GVRP state machines on all ports. The value of this object MUST be retained across reinitializations of the management system. Read-write access. |
|
| dot1qPortVlanTable | dot1qPvid | The PVID, the VLAN-ID assigned to untagged frames or Priority-Tagged frames received on this port. Read-Write access. |
| dot1qPortAcceptcableFrameTypes |
When admitAll (1), untagged frames or Priority-Tagged frames received on this port will be accepted and assigned to a VID based on the PVID and VID Set for this port. This control does not affect VLAN-independent Bridge Protocol Data Unit (BPDU) frames, such as GVRP and Spanning Tree Protocol (STP (Spanning Tree Protocol)). It does affect VLAN- dependent BPDU frames, such as GMRP. ExtremeXOS does not support on setting of this object with admitOnlyVlanTagged (2). Read-write access. |
|
| dot1qPortIngressFiltering | When this is true (1), the device discards
incoming frames for VLANs that do not include this Port in its Member set. When
false (2), the port accepts all incoming frames. This control does not affect
VLAN-independent BPDU frames, such as GVRP and STP. It does affect VLAN-dependent
BPDU frames such as GMRP. The value of this object MUST be retained across
reinitializations of the management system. Note: Note:
Ingress filtering cannot be disabled on this object.
Read-Write access. |
|
| dot1qPortGvrpStatus |
The state of GVRP operation on this port. The value enabled (1) indicates that GVRP is enabled on this port, as long as dot1qGvrpStatus is also enabled for this device. When disabled (2) but dot1qGvrpStatus is still enabled for the device, GVRP is disabled on this port: any GVRP packets received is silently discarded, and no GVRP registrations is propagated from other ports. This object affects all GVRP Applicant and Registrar state machines on this port. A transition from disabled (2) to enabled (1) causes a reset of all GVRP state machines on this port. The value of this object MUST be retained across reinitializations of the management system. Read-write access. |
|
| dot1qPortGvrpFailedRegistrations |
The total number of failed GVRP registrations, for any reason, on this port. Read-only access |
|
| dot1qPortGvrpLastPduOrigin |
The Source MAC Address of the last GVRP message received on this port. Read-only access. |
|
| dot1qPortRestrictedVlanRegistration |
This object is always set to FALSE in ExtremeXOS. Restricted VLAN registration per port cannot be enabled. Read-write access. |
|
| dot1qVlanStaticTable |
dot1qVlanStaticName dot1qVlanStaticEgressPorts dot1qVlanForbiddenEgressPorts dot1qVlanStaticUntaggedPorts dot1qVlanStaticRowStatus |
An administratively assigned string, which may be used to identify the VLAN. Read-Create access. The set of ports that are permanently assigned to the egress list for this VLAN. Read-Create access. The set of ports that are prohibited by management from being included in the egress list for this VLAN. ExtremeXOS does not support forbidden ports, so this object always returns 0. Read-Create Access. The set of ports that should transmit egress packets for this VLAN as untagged. Read-Create access. This object indicates the status of this entry. Read-Create access. |
| dot1qVlanCurrentTable |
dot1qVlanFdbId dot1qVlanCurrentEgressPorts dot1qVlanCurrentUntaggedPorts dot1qVlanStatus dot1qVlanCreationTime |
A table containing current configuration information for each VLAN currently configured into the device by (local or network) management, or dynamically created as a result of GVRP requests received." The objects in this table has read-only access. |
Print
this page
Email this topic
Feedback
View PDF
Download EPUB