restconf
Enable or disable the Representational State
Transfer Configuration Protocol (RESTCONF) server.
Syntax
-
default restconf
<enable | tcp-port | tls | trap-notification>
-
no restconf <enable |
install-cert-file | tls | trap-notification>
-
restconf <enable |
install-cert-file WORD<1-128> | tcp-port <1-49151> | tls |
trap-notication>
Command Parameters
- enable
- Enables the RESTCONF server.
- install-cert-file WORD <1-128>
- Installs the certificate file for
RESTCONF.
- tcp-port <1-49151>
- Specifies the TCP port to use for
the RESTCONF server. The default is 8080.
- tls
- Enables or disables TLS/SSL for
the RESTCONF server. The default is disable.
- trap-notification
- Enables or disables trap
notification with the RESTCONF protocol is not available. The default is enable.
Default
The default value is disable.
Command Mode
Application Configuration
