New in this Document

The following sections detail what is new in this document.

New Commands

The following commands are newly added to this document:

Updated Commands

The following commands are updated in this document:

Table 1. Existing Command Updates
Command	Update
ip directed-broadcast (for a port and for a VLAN)	Corrected default value to disabled.
ip route (globally and for a VRF)	Added syntax to permit Classless Inter-Domain Routing (CIDR) notation.
reset	Added new parameters to delay and to cancel the switch reset.
show cli password	Updated output example.
show cli username	Added output example.
show fa elements	Updated output example.
show fa interface	Added a field description.
show interfaces gigabitethernet auto-sense	Updated output example.
show interfaces gigabitethernet statistics verbose	Added field descriptions for IN_LSM and OUT_LSM.
show ip igmp interface	Added output example.
show io	Added a new parameter to see multipath egress objects, like how many ECMP resources are in use.
show ports statistics ospf extended	Added Usage Guidelines.
show ports statistics ospf main	Added Usage Guidelines.
show web-server	Added a new parameter to see if SSL renegotiation is enabled or disabled.

Removed Commands

The following commands are removed from this document:

auth-key
boot config flags linerate-directed-broadcast
cfm cmac enable
cfm cmac level
cfm cmac mepid
debug-ipsec level <-1-5>
egress-shaping-rate <1-1000>
ipsec
ipsec auth-method
ipsec compression
ipsec esp
ipsec fragment-before-encrypt
ipsec remote-nat-ip {A.B.C.D}
ipsec responder-only
ipsec tunnel-dest-ip
ipsec tunnel-source-address {A.B.C.D}
ipsec tunnel-source-address type <dhcp | static {A.B.C.D}>
propagate-to-routing [vrf WORD<0-16>]
qos if-policer
show application slamon agent
show cfm cmac
show eapol multihost non-eap-mac status
show eapol status interface
show i-sid limit-fdb-learning
show interfaces gigabitethernet statistics bridging
show interfaces gigabitEthernet statistics policer
show io cpu-cosq-counters
show io filter-tables
show io ipsec logs
show io ipsec stats
show io ipsec status
show io logical-intf-ipsec
show io logical-intf-tables
show io performance-vcpu
show io spb-tables
show io tunnel-stats
show isis logical-interface ipsec
show khi fe-ona detail
show khi fe-ona status
show routing statistics
show trace spbm isis
slamon agent ip address {A.B.C.D} [vrf WORD<1-16>]
slamon agent port <0-65535>
slamon agent-comm-port <0-65535>
slamon install-cert-file WORD<0-128>
slamon oper-mode [enable]
slamon server ip address {A.B.C.D}
slamon server port <0-65535>
snmp-server force-iphdr-sender enable
snmp-server force-trap-sender enable
snmp-server sender-ip {A.B.C.D} {w.x.y.z}
sys clipId-topology-ip
sys force-topology-ip-flag
syslog ip-header-type circuitless-ip
tacacs server secondary-host source {A.B.C.D}
tacacs server secondary-host source {A.B.C.D} source-ip-interface enable
trace flags isis
trace flags isis remove
trace flags isis set
trace spbm isis level <1-4>
uboot-install