show vlan remote-mac-table

Display customer VLAN (C-VLAN) remote-mac-table information.

Syntax

Command Parameters

<1-4059>
Specifies the VLAN ID in the range of 1 to 4059. By default, VLAN IDs 1 to 4059 are configurable and the system reserves VLAN IDs 4060 to 4094 for internal use. If you enable VRF scaling and SPBM mode, the system also reserves VLAN IDs 3500 to 3998. VLAN ID 1 is the default VLAN and you cannot create or delete VLAN ID 1.
alternative
Shows the table in the alternative way.

Default

None

Command Mode

User EXEC

Command Output

The show vlan remote-mac-table command displays the following information:

Output field

Description

VLAN

Indicates the VLAN ID for this MAC address.

STATUS

Indicates the status of this entry:

  • other

  • invalid

  • learned

  • self

  • mgmt

MAC-ADDRESS

Indicates the customer MAC address for which the bridge has forwarding and/or filtering information.

DEST-MAC

Indicates the provide MAC address for which the bridge has forwarding and/or filtering information.

BVLAN

Indicates the B-VLAN ID for this MAC address.

DEST-SYSNAME

Indicates the system name of the node where the MAC address entry comes from.

PORTS

Either displays the value 0 or indicates the port in which a frame comes from.

SMLT REMOTE

Indicates the MAC address entry for the remote vIST peer.
9037802-00 Rev AA