ip dhcp-server netbios-node-type

Syntax

• ip dhcp-server netbios-node-type <0x1|0x2|0x4|0x8>

• default ip dhcp-server netbios-node-type

Command Parameters

<0x1|0x2|0x4|0x8>

Specifies the node type for the NetBIOS name server. The following list provides definitions of the allowed values:

• 0x1—B-node

• 0x2—P-node

• 0x4—M-node

• 0x8—H-node

Default

The default is 0x0 (unconfigured).

Command Mode

Global Configuration

Usage Guidelines

This node setting applies to each DHCP subnet that DHCP Server services unless there is an overriding NetBIOS node type setting within the subnet.