show ip arp
Show ARP information to view the configuration information in the ARP table.
Syntax
-
show ip arp
-
show ip arp
{A.B.C.D}
-
show ip arp
gigabitEthernet {{slot/port[sub-port]}
-
show ip arp
gigabitEthernet {{slot/port[sub-port]} vrfids WORD<0-512>
-
show ip arp
gigabitEthernet{{slot/port[sub-port]} vrf WORD<1-16>
-
show ip arp -s {A.B.C.D}
{A.B.C.D}
-
show ip arp
spbm-tunnel-as-mac
-
show ip arp vlan <1-4059>
-
show ip arp vrf
WORD<1-16>
-
show ip arp vrfids
WORD<0-512>
Command Parameters
- {A.B.C.D}
- Specifies the network IP address
for the table.
- {slot/port[sub-port]}
- Identifies a single slot and port.
If your platform supports channelization and the port is channelized, you must
also specify the subport in the format slot/port/sub-port.
- gigabitEthernet {slot/port[sub-port]} vrfids WORD<0-512>
- Specifies the VRF ID. The total
number of ARPs listed in the summary line of the show ip arp display represents
the total number of ARPs on the chassis, including all VRFs (which includes the
Mgmt Router VRF). {{slot/port[sub-port]} identifies a single slot and port. If
your platform supports channelization and the port is channelized, you must also
specify the subport in the format slot/port/sub-port.
- interface
- Displays ARP interface
configuration information.
- -s {A.B.C.D} {A.B.C.D}
- Specifies the network IP address
for the table.
- spbm-tunnel-as-mac
- Displays the remote host name in
the TUNNEL column for the SPBM ARP entry.
- vlan <1-4059>
-
Specifies the
VLAN ID in the range of 1 to 4059. By default, VLAN IDs 1 to
4059 are configurable and the system reserves VLAN IDs 4060 to
4094 for internal use. On switches that support the vrf-scaling and spbm-config-mode boot configuration flags, if
you enable these flags, the system also reserves VLAN IDs 3500
to 3998. VLAN ID 1 is the default VLAN and you cannot create or
delete VLAN ID 1.
- vrf WORD<1-16>
- Specifies the name of the VRF. The
total number of ARPs listed in the summary line of the show ip arp display
represents the total number of ARPs on the chassis including all VRFs (which
includes the Mgmt Router VRF).
- vrfids WORD<0-512>
- Specifies the VRF ID. The total
number of ARPs listed in the summary line of the show ip arp display represents
the total number of ARPs on the chassis, including all VRFs (which includes the
Mgmt Router VRF).
- vrfids WORD<0-512>
- Specifies the VRF ID. The total
number of ARPs listed in the summary line of the show ip arp display represents
the total number of ARPs on the chassis, including all VRFs (which includes the
Mgmt Router VRF).
