ip rsmlt
Configure Routed Split MultiLink Trunking (RSMLT) on an IPv4 VLAN interface.
Syntax
-
default ip rsmlt
-
default ip rsmlt
holddown-timer
-
default ip rsmlt
holddown-timer holdup-timer
-
default ip rsmlt
holdup-timer
-
ip rsmlt
-
ip rsmlt holddown-timer
<0-3600>
-
ip rsmlt holddown-timer
<0-3600> holdup-timer <0-9999>
-
ip rsmlt holdup-timer
<0-9999>
-
no ip rsmlt
Command Parameters
- holddown-timer<0-3600>
- Defines how long the RSMLT switch
does not participate in Layer 3 forwarding. <0-3600> is the timer value in
seconds.Configure this value to be longer than the anticipated routing protocol
convergence. The default holddown timer is 60.
- holdup-timer<0-3600|9999>
- Defines how long the RSMLT switch
maintains forwarding for its peer. 0-3600 is the timer value in seconds. 9999
means infinity. The default holdup timer is 1800.
Command Mode
VLAN Interface Configuration
