show slpp interface
Show Simple Loop Prevention Protocol (SLPP) information for a port so that you can view the
loop information for a port.
Syntax
-
show slpp interface
GigabitEthernet
-
show slpp interface
GigabitEthernet [{slot/port[/sub-port][-slot/port[/sub-port]][,...]}]
Command Parameters
- GigabitEthernet {slot/port[/sub-port][-slot/port[/sub-port]][,...]}
- Identifies the slot and port in
one of the following formats: a single slot and port (slot/port), a range of slots
and ports (slot/port-slot/port), or a series of slots and ports
(slot/port,slot/port,slot/port). If your platform supports channelization and the
port is channelized, you must also specify the sub-port in the format
slot/port/sub-port.
