show ports statistics ospf main

Syntax

• show ports statistics ospf main {slot/port[/sub-port][-slot/port[/sub-port]][,...]}

Command Parameters

{slot/port[/sub-port] [-slot/port[/sub-port]] [,...]}

Identifies the slot and port in one of the following formats: a single slot and port (slot/port), a range of slots and ports (slot/port-slot/port), or a series of slots and ports (slot/port,slot/port,slot/port). If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.

Default

None

Command Mode

Privileged EXEC

Usage Guidelines

This command provides values for brouter port implementations. For IP protocol-based VLAN interface statistics, use show ip ospf ifstats.

Command Output

The show ports statistics ospf main command displays the following information: