Display the RMON2 configuration state of the management interface.
show mgmt rmon
User EXEC
The show mgmt rmon command displays the following information:
|
Output field |
Description |
|---|---|
|
INST |
Specifies the management instance ID. |
|
DESCR |
Specifies the interface type. |
|
RMON-ADMIN-ENABLE |
Specifies whether RMON2 is enabled on the management interface. |
|
RMON-OPER-ENABLE |
Specifies whether RMON2 is operationally enabled on the management interface, meaning that the interface itself is also enabled. |
|
RMON-IP-ADDR |
Specifies the management interface preferred IPv4 address. |
Switch:1>show mgmt rmon =============================================================================== Mgmt Rmon Information =============================================================================== INST DESCR RMON-ADMIN-ENABLE RMON-OPER-ENABLE RMON-IP-ADDR ------------------------------------------------------------------------------- 1 Mgmt-oob1 disable disable 0.0.0.0 3 Mgmt-clip enable enable 192.0.2.72 4 Mgmt-vlan enable enable 198.51.100.72