Displays the IPv6 static RP table
show ipv6 pim static-rp
None
User EXEC
The show ipv6 pim static-rp command displays the following information:
|
Output field |
Description |
|---|---|
|
GRPADDR |
Indicates the IPv6 address of the multicast group. When combined with the group mask, it identifies the prefix that the local router uses to advertise itself as a static RP. |
|
GRPMASK |
Indicates the address mask of the multicast group. When combined with the group address, it identifies the prefix that the local router uses to advertise itself as a static RP. |
|
RPADDR |
Indicates the IPv6 address of the static RP. This address can be one of the local IPv6 PIM-SM enabled interfaces or any reachable IPv6 global address as configured using the static-rp CLI commands. |
|
STATUS |
Indicates the status of IPv6 static RP. |
The following example displays the IPv6 static RP table.
Switch:1>show ipv6 pim static-rp
============================================================================
Pim Static RP Table - GlobalRouter
============================================================================
GRPADDR/GRPMASK STATUS
RPADDR
----------------------------------------------------------------------------
ff10:0:0:0:0:0:0:0/64
5040:0:0:0:0:1:84:1 valid
ff30:0:0:0:0:0:0:0/64
5040:0:0:0:0:1:84:1 valid
ff30:1:0:0:0:0:0:0/32
5174:0:0:0:0:1:84:1 valid
Total PIM Static RPs Displayed: 3/3