show eapol auth-stats interface

Display the Authenticator statistics to manage network performance.

Syntax

Command Parameters

gigabitethernet {slot/port[/sub-port][-slot/port[/sub-port]][,...]}
Identifies the slot and port in one of the following formats: a single slot and port (slot/port), a range of slots and ports (slot/port-slot/port), or a series of slots and ports (slot/port,slot/port,slot/port). If your platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.
vlan <1-4059>

Specifies the VLAN ID in the range of 1 to 4059. By default, VLAN IDs 1 to 4059 are configurable and the system reserves VLAN IDs 4060 to 4094 for internal use. On switches that support the vrf-scaling and spbm-config-mode boot configuration flags, if you enable these flags, the system also reserves VLAN IDs 3500 to 3998. VLAN ID 1 is the default VLAN and you cannot create or delete VLAN ID 1.

Default

None

Command Mode

User EXEC

Command Output

The show eapol auth-stats interface command displays the following information:

Output field

Description

PORT

Displays the port number in use.

EAP RCVD

Displays the number of EAPoL-EAP frames received by this Authenticator.

AUTH-EAP TX

Displays the number of EAPoL-EAP frames transmitted by the Authenticator.

START RCVD

Displays the number of EAPoL start frames received by this Authenticator.

LOGOFF RCVD

Displays the number of EAPoL logoff frames received by this Authenticator.

INVALID FRAMES

Displays the number of EAPoL frames received by this Authenticator in which the frame type is not recognized.

LENGTH ERROR

Displays the number of EAPoL frames received by this Authenticator in which the Packet Body Length field is invalid.

LAST-RX VER

Displays the last received version of the EAPoL frame by this Authenticator.

LAST-RX SRC

Displays the source MAC address of the last received EAPoL frame by this Authenticator.
9037802-00 Rev AA