show isis multi-area l2 redistribute snoop-multicast

Syntax

• show isis multi-area l2 redistribute snoop-multicast

Default

The default is none.

Command Mode

User EXEC

Usage Guidelines

This command does not apply to all hardware platforms. For more information about feature support, see Fabric Engine and VOSS Feature Support Matrix.

Command Output

The show isis multi-area l2 redistribute snoop-multicast command displays the following information:

Parameter	Description
ISID	Indicates the I-SID value.
ISID LIST	Indicates the name of the I-SID list.
DIRECTION	Indicates the direction of the redistribution policy.
ENABLE	Indicates if the redistribution policy is enabled on the switch.
RPOLICY	Indicates the route policy for IS-IS Multi-area SPB layer 2 multicast snooping redistribution for a specific I-SID or I-SID list.

Example

Displaying the IS-IS Multi-area SPB layer 2 multicast snooping configuration:

Switch:1>show isis multi-area l2 redistribute snoop-multicast
=================================================================================
               MULTI-AREA L2 SNOOP MULTICAST REDISTRIBUTE BY ISID
=================================================================================
ISID       DIRECTION            ENABLE     RPOLICY
---------------------------------------------------------------------------------
1100      home-to-remote        TRUE       test
=================================================================================
            MULTI-AREA L2 SNOOP MULTICAST REDISTRIBUTE BY ISID LIST
=================================================================================
ISID LIST           DIRECTION            ENABLE     RPOLICY
---------------------------------------------------------------------------------
List1               home-to-remote       TRUE       test
---------------------------------------------------------------------------------