ip mroute resource-usage
egress-threshold
Configure the resource usage counters to query the number of ingress and egress IP
multicast streams traversing your switch.
Command Parameters
- egress-threshold <0-32767>
- Configures the egress record
threshold (S,G). A notification message is sent if this value is exceeded.
- The integer is a value between
0-32767. To set this option to the default value, use the default operator with
the command. The default is 0.
- ingress-threshold <0-32767>
- Configures the ingress record
threshold (peps). A notification message is sent if this value is exceeded.
- The integer is a value between
0-32767. To set this option to the default value, use the default operator with
the command. The default is 0.
Command Mode
Global Configuration
