show spanning-tree mstp msti port
Shows the configuration, role, or statistics information of an MSTP port.
Syntax
-
show spanning-tree mstp
msti port config
-
show spanning-tree mstp
msti port config
[{slot/port[/sub-port][-slot/port[/sub-port]][,...]}]
-
show spanning-tree mstp
msti port role
-
show spanning-tree mstp
msti port role [{slot/port[/sub-port][-slot/port[/sub-port]][,...]}]
-
show spanning-tree mstp
msti port statistics
-
show spanning-tree mstp
msti port statistics
[{slot/port[/sub-port][-slot/port[/sub-port]][,...]}]
Command Parameters
- config {slot/port[/sub-port][-slot/port[/sub-port]][,...]}
- Shows the configuration
information of an MSTP port. {slot/port[/sub-port][-slot/port[/sub-port]][,...]}
identifies the slot and port in one of the following formats: a single slot and
port (slot/port), a range of slots and ports (slot/port-slot/port), or a series of
slots and ports (slot/port,slot/port,slot/port). If your platform supports
channelization and the port is channelized, you must also specify the sub-port in
the format slot/port/sub-port.
- role {slot/port[/sub-port][-slot/port[/sub-port]][,...]}
- Shows the role information of an
MSTP port. {slot/port[/sub-port][-slot/port[/sub-port]][,...]} identifies the slot
and port in one of the following formats: a single slot and port (slot/port), a
range of slots and ports (slot/port-slot/port), or a series of slots and ports
(slot/port,slot/port,slot/port). If your platform supports channelization and the
port is channelized, you must also specify the sub-port in the format
slot/port/sub-port.
- statistics {slot/port[/sub-port][-slot/port[/sub-port]][,...]}
- Shows the statitics information of
an MSTP port. {slot/port[/sub-port][-slot/port[/sub-port]][,...]} identifies the
slot and port in one of the following formats: a single slot and port (slot/port),
a range of slots and ports (slot/port-slot/port), or a series of slots and ports
(slot/port,slot/port,slot/port). If your platform supports channelization and the
port is channelized, you must also specify the sub-port in the format
slot/port/sub-port.
