show ipv6 vrrp interface
Shows the extended Virtual Router Redundancy Protocol (VRRP) configuration for all
interfaces or for a specific interface.
Syntax
-
show ipv6 vrrp interface
[verbose]
-
show ipv6 vrrp interface
gigabitethernet [{slot/port[/sub-port][-slot/port[/sub-port]][,...]}]
[verbose]
-
show ipv6 vrrp interface
gigabitethernet vrf WORD<1-16>
-
show ipv6 vrrp interface
gigabitethernet vrfids WORD<0-512>
-
show ipv6 vrrp interface
vlan [<1-4059>] [verbose]
-
show ipv6 vrrp interface
vlan vrf WORD<1-16>
-
show ipv6 vrrp interface
vlan vrfids WORD<0-512>
-
show ipv6 vrrp interface
vrf WORD<1-16>
-
show ipv6 vrrp interface
vrfids WORD<0-512>
-
show ipv6 vrrp interface
vrid <1-255> [verbose]
-
show ipv6 vrrp interface
vrid <1-255> vrf WORD<1-16>
-
show ipv6 vrrp interface
vrid <1-255> vrfids WORD<0-512>
Command Parameters
- {slot/port[/sub-port][-slot/port[/sub-port]][,...]}
- Identifies the slot and port in
one of the following formats: a single slot and port (slot/port), a range of slots
and ports (slot/port-slot/port), or a series of slots and ports
(slot/port,slot/port,slot/port). If your platform supports channelization and the
port is channelized, you must also specify the sub-port in the format
slot/port/sub-port.
- <1-255>
- Displays information by virtual
router ID.
- <1-4059>
- Specifies the VLAN ID in the range
of 1 to 4059. By default, VLAN IDs 1 to 4059 are configurable and the system
reserves VLAN IDs 4060 to 4094 for internal use. If you enable VRF scaling and
SPBM mode, the system also reserves VLAN IDs 3500 to 3998. VLAN ID 1 is the
default VLAN and you cannot create or delete VLAN ID 1.
- verbose
- Displays extended
information.
- vrf WORD<1-16>
- Specifies a VRF name. The VRF
parameter is optional.
- vrfids WORD<0-512>
- Specifies a VRF by ID. The VRF
parameter is optional.
