show lldp tx-tlv dot3

Display dot3 MAC/PHY configuration/status Link Layer Discovery Protocol (LLDP) TLVs.

Syntax

show lldp tx-tlv dot3

Default

None

Command Mode

Privileged EXEC

Command Output

The show lldp tx-tlv dot3 command displays the following information:


Output field	Description
Port	Specifies the port number.
MAC Physical Config Status	Specifies the status of the MAC Physical Config Status TLV. The default is disabled.

Switch:1(config-if)#show lldp tx-tlv dot3
=======================================================================
                              LLDP port dot3 tlvs
======================================================================= 
----------------------------------------------------------------------- 
Port       MAC Physical
           Config Status
-----------------------------------------------------------------------
1/1        disabled
1/2        enabled
1/3        enabled
1/4        disabled
1/5        disabled