Privileged EXEC mode
This command is supported only on SLX 9540 and SLX 9640 devices.
The following message appears when this command is executed:
WARNING: Hardware image will be upgraded and followed with a board-level power cycling. Do you want to continue?[y/n]:
After the CPLD is updated, the entire board is power-cycled.
The following example upgrades the firmware on an SLX 9540.
device# firmware peripheral-update cpld
WARNING: Hardware image will be upgraded and followed with a board-level power cycling.
Do you want to continue?[y/n]: y
for cpld0:
erasing ........done
programming .......................... 25% ......................... 50% .......................... 75% ......................... 100%
for cpld1:
erasing ........done
programming .......................... 25% ......................... 50% .......................... 75% ......................... 100%