fec (telemetry)

Indicates the MPLS FEC address to be used for the mpls-traffic-fec profile.

Syntax

fec fec-address
no fec fec-address

Parameters

fec-address
Specifies the address of the target FEC for the profile.

Modes

Telemetry profile configuration mode

Usage Guidelines

The fec-address variable must be unique.

The no form of the command deletes the FEC address from the profile.

MPLS is supported on the Extreme 8820, SLX 9740, SLX 9640, and SLX 9540 devices only.

Examples

The following example selects 20.10.3.4 as the FEC address for the profile.

device(config)# telemetry profile mpls-traffic-fec default_mpls_traffic_fec_statistics 
device(config-telemetry-profile)# fec 20.10.3.4