show isis neighbors

Displays IS-IS neighbor information.

Syntax

show isis neighbor [ detail ]

Parameters

detail
Specifies detailed information.

Modes

Privileged EXEC mode

Usage Guidelines

IS-IS is supported on the Extreme 8820, SLX 9740, SLX 9640, and SLX 9540 devices only.

Output

The show isis neighbors command displays the following information:

Output field

Description

Total number of IS-IS Neighbors

The number of ISs with which the device has formed IS-IS adjacencies.

System ID

The System ID of the neighbor or the hostname of the neighbor.

Interface

The device port or virtual interface attached to the neighbor.

SNPA

The Subnetwork Point of Attachment (SNPA), which is the MAC address of the device port or virtual interface attached to the neighbor.

State

The state of the adjacency with the neighbor. The state can be one of the following:

  • DOWN - The adjacency is down.
  • INIT - The adjacency is being established and is not up yet.
  • UP - The adjacency is up.

Holdtime

The neighbor‘s advertised hold time.

Type

The IS-IS type of the adjacency. The type can be one of the following:

  • ISL1 - Level-1 IS
  • ISL2 - Level-2 IS
  • ES - ES
Note: The device forms a separate adjacency for each IS-IS type. Thus, if the device has both types of IS-IS adjacencies with the neighbor, the display contains a separate row of information for each adjacency.

Pri

The priority of this IS to be elected as the Designated IS in this broadcast network.

StateChgeTime

The amount of time that has passed since the adjacency last changed state.

Protocol

The routing protocol supported by the neighbor. The protocol can be one of the following:

  • MT-ISIS - Multi-Topology is enabled on the neighbor.
  • ISIS - Multi-Topology is not enabled on the neighbor.

The show isis neighbors detail command displays the following information:

Output field

Description

Total number of IS-IS Neighbors

The number of ISs with which the device has formed IS-IS adjacencies.

System ID

The System ID of the neighbor or the hostname of the neighbor.

Interface

The device port or virtual interface attached to the neighbor.

SNPA

The Subnetwork Point of Attachment (SNPA), which is the MAC address of the device port or virtual interface attached to the neighbor.

State

The state of the adjacency with the neighbor. The state can be one of the following:

  • DOWN - The adjacency is down.
  • INIT - The adjacency is being established and is not up yet.
  • UP - The adjacency is up.

Holdtime

The neighbor‘s advertised hold time.

Type

The IS-IS type of the adjacency. The type can be one of the following:

  • ISL1 - Level-1 IS
  • ISL2 - Level-2 IS
  • ES - ES
Note: The device forms a separate adjacency for each IS-IS type. Thus, if the device has both types of IS-IS adjacencies with the neighbor, the display contains a separate row of information for each adjacency.

Pri

The priority of this IS to be elected as the Designated IS in this broadcast network.

StateChgeTime

The amount of time that has passed since the adjacency last changed state.

3-Way Handshake TLV received

The received 3-way handshake TLV for the interface.

Area Address (es)

The address of the area.

Protocols Supported

The topology supported by the neighbor.

IP Address

The IP address assigned to the neighbor interface.

Adj Usage L1

The adjacency level used by the neighbor.

circuit ID

The ID of the IS-IS circuit running on the neighbor interface.

Protocol

The routing protocol supported by the neighbor. The protocol can be one of the following:

  • MT-ISIS - Multi-Topology is enabled on the neighbor.
  • ISIS- Multi-Topology is not enabled on the neighbor.

Examples

The following example displays information about IS-IS neighbors.

device# show isis neighbors