connector

Accesses connector configuration mode for the ports that support the breakout feature and the insight port feature.

Syntax

connector 0/port

Parameters

0/port: Specifies a valid port number on the device that supports breakout mode or insight mode.

Modes

Hardware configuration mode

Usage Guidelines

In connector configuration mode, you can break out the port that supports the breakout feature into four 10G or 25G breakout interfaces, or you can enable or disable the port that supports the insight port feature.

Examples

This example shows how to access the connector configuration mode on a supported port on SLX 9640.

device# configure terminal
device(config)# hardware
device(config-hardware)# connector 0/25