bypass-lsp

Creates a bypass LSP by using the bypass-lsp command. Thereafter, in the bypass LSP context, you must specify at least one interface as an excluded or protected interface.

Syntax

bypass-lsp name
no bypass-lsp name

Parameters

name
Specifies the name of the target LSP.

Modes

MPLS router configuration mode

Usage Guidelines

The name variable must be unique among all regular LSPs and bypass LSPs.

The no form of the command deletes the bypass LSP from the system.

MPLS is supported on the Extreme 8820, SLX 9740, SLX 9640, and SLX 9540 devices only.

Examples

The following example selects the xm4-by LSP as a bypass LSP.

device>configure
device(config)# router mpls
device(config-router-mpls)# bypass-lsp xm4-by
device(config-router-mpls-bypasslsp-xm4-by)#