lsp-interval

Sets the rate of transmission, in milliseconds, of the Link State PDUs (LSPs).

Syntax

lsp-interval interval
no lsp-interval interval

Command Default

The default interval is 33 milliseconds.

Parameters

secs

Specifies the interval in milliseconds. Valid values range from 1 through 4294967295 milliseconds. The default is 33 milliseconds.

Modes

IS-IS router configuration mode

Usage Guidelines

IS-IS is supported on the Extreme 8820, SLX 9740, SLX 9640, and SLX 9540 devices only.

The no form of the command removes the configured interval.

Examples

The following example changes the LSP interval to 45 milliseconds.

device# configure terminal
device(config)# router isis
device(config-isis-router)# lsp-interval 45