Navigates into the interface's Maintenance sub-mode.
There are no defaults for this command.
Interface Configuration context. Navigates into the maintenance sub-mode for the selected interface.
This mode is a sub-mode of the interface's configuration mode. Use this command to navigate into the interface's maintenance sub-mode.
This command cannot be run on interfaces that are configured as ICL, CCEP, or cluster-tracked.
When the device's firmware is downgraded to a version that does not support this maintenance sub-mode, this configuration setting is dropped.
This example navigates into an interface's maintenance mode.
SLX (config)# interface Ethernet 0/1 SLX(conf-if-eth-0/1)# maintenance-mode SLX(config-maintenance-mode)#