Displays configured DSCP to traffic class mutation maps or displays information about a specific map.
Privileged EXEC mode
Note
This command is supported on the Extreme 8720, Extreme 8520, SLX 9250, and SLX 9150 devices only.
This example displays information on defined QoS DSCP to traffic class mutation maps and where they are applied.
device# show qos maps dscp-traffic-class
Dscp-to-Traffic-Class map 'dscpTC'
{x/y: traffic-class = x, drop-precedence = y & dscp = d1d2}
d1 : d2 0 1 2 3 4 5 6 7 8 9
------------------------------------------------
0 : 0/0 0/0 0/0 0/0 0/0 0/0 0/0 0/0 4/2 1/0
1 : 1/0 1/0 1/0 1/0 1/0 1/0 2/0 2/0 2/0 2/0
2 : 2/0 2/0 2/0 2/0 3/0 3/0 3/0 3/0 3/0 3/0
3 : 3/0 3/0 4/0 4/0 4/0 4/0 4/0 4/0 4/0 4/0
4 : 5/0 5/0 5/0 5/0 5/0 5/0 5/0 5/0 6/0 6/0
5 : 6/0 6/0 6/0 6/0 6/0 6/0 7/0 7/0 7/0 7/0
6 : 7/0 7/0 7/0 7/0
Enabled on the following interfaces:
Eth 1/4
This example shows information about a specified map.
device# show qos maps dscp-traffic-class td-map1
[Note: CoS = Class of Service, TC = Traffic Class, DP = Drop Precedence]
TC-to-DSCP Map: td-map1
In-TC: 00 1 2 3 4 5 6 7
----------------------------------------------
Out-DSCP(DP=0): 00 08 12 24 32 40 48 56
Out-DSCP(DP=1): 00 08 13 24 32 43 48 56
Out-DSCP(DP=2): 00 00 00 00 00 00 00 00
Out-DSCP(DP=3): 00 00 00 00 00 00 00 00