neighbor encapsulation
Syntax
neighbor
{
IPv4-address
|
IPv6-address |
peer-group-name
}
{
vxlan
}
no neighbor
{
IPv4-address
|
IPv6-address |
peer-group-name
}
{vxlan
}
Command Default
None (SLX 9150 and
SLX 9250 devices)
Parameters
- IPv4-address
- Specifies an IPv4 address.
- IPv6-address
- Specifies an IPv6 address.
- peer-group-name
- Specifies a peer group.
- vxlan
- Specifies VXLAN encapsulation.
Modes
BGP address-family L2VPN EVPN configuration mode
Usage Guidelines
The
no form of the command restores the default.
Examples
The following example configures VXLAN
encapsulation for an IPv4 neighbor.
device# configure terminal
device(config)# router bgp
device(config-bgp-router)# address-family l2vpn evpn
device(config-bgp-evpn)# neighbor 10.1.1.1 encapsulation vxlan
