Displays the ARP-packet debug configuration.
Privileged EXEC mode
The show debug arp packet command displays the following information:
| Output field | Description |
|---|---|
| Protocol Type | Displays "ARP". |
| Package Flow | Displays "Sending" or "Rcvd". |
| Packet Type | Displays "ARP". |
| VRF ID | Displays the VRF ID. |
| Interface Info | Displays the physical or port-channel interface. |
| ScrMAC | Displays the MAC address of the source. |
| DstMAC | Displays the MAC address of the destination. |
| SrcIP | Displays the IP address of the source. |
| DstIP | Displays the IP address of the destination. |
The following example is a typical output of the show debug arp packet buffer option.
device# show debug arp packet buffer
Protocol Type : ARP
Packet Flow : Sending
Packet Type : Req
VRF ID : 1
Interface info : Eth 1/1
Ethernet, SrcMAC : 768e.f807.2005, DstMAC: 0000.0000.0000
Internet proto,SrcIP : 11.1.1.1, DstIP: 11.1.1.1
Protocol Type : ARP
Packet Flow : Sending
Packet Type : Req
VRF ID : 1
Interface info : Eth 1/1
Ethernet, SrcMAC : 768e.f807.2005, DstMAC: 0000.0000.0000
Internet proto,SrcIP : 11.1.1.1, DstIP: 11.1.1.1
Protocol Type : ARP
Packet Flow : Rcvd
Packet Type : Req
VRF ID : 1
Interface info : Eth 1/1
Ethernet, SrcMAC : 0010.9400.0001, DstMAC: 0000.0000.0000
Internet proto,SrcIP : 11.1.1.2, DstIP: 11.1.1.1
Protocol Type : ARP
Packet Flow : Sending
Packet Type : Rep
VRF ID : 1
Interface info : Eth 1/1
Ethernet, SrcMAC : 768e.f807.2005, DstMAC: 0010.9400.0001
Internet proto, SrcIP : 11.1.1.1, DstIP: 11.1.1.2