show bgp evpn routes best

Displays information for BGP EVPN routes that were selected as best routes.

Syntax

show bgp evpn routes best [ type { auto-discovery | ethernet-segment | inclusive-multicast | ipv4-prefix | ipv6-prefix | mac |igmp-join-sync | igmp-leave-sync } ]

Parameters

type: Specifies the type of route.
auto-discovery: Specifies automatically discovered routes.
ethernet-segment: Specifies Ethernet Segments (ES) routes.
inclusive-multicast: Specifies inclusive multicast routes.
ipv4-prefix: Specifies IPv4 prefix routes.
ipv6-prefix: Specifies IPv6 prefix routes.
mac: Specifies MAC routes.
igmp-join-sync: Specifies Join Sync routes.
igmp-leave-sync: Specifies Leave Sync routes.

Modes

Privileged EXEC mode

Examples

The following example shows output for the show bgp evpn routes best command.

device# show bgp evpn neighbors 20.0.0.2 routes best
Status A:AGGREGATE B:BEST b:NOT-INSTALLED-BEST C:CONFED_EBGP D:DAMPED
       E:EBGP H:HISTORY I:IBGP L:LOCAL M:MULTIPATH m:NOT-INSTALLED-MULTIPATH
       S:SUPPRESSED F:FILTERED s:STALE
       Prefix             Next Hop        MED        LocPrf     Weight Status
1      IMR:[0][IPv4:2.2.2.2]
                          2.2.2.2         0          100        0      BI
         AS_PATH:
         L2 Label: 2 (VNI)
2      ARP:[0][609c.9fde.1215]:[IPv4:2.1.1.1]
                          2.2.2.2         0          100        0      BI
         AS_PATH:
            L2 Label: 2 L3 Label: 0 (VNI)
         ESI : 00.000000000000000000
3      ARP:[0][609c.9fde.1215]:[IPv4:102.1.1.1]
                          2.2.2.2         0          100        0      BI
         AS_PATH:
            L2 Label: 2 L3 Label: 0 (VNI)
         ESI : 00.000000000000000000
4      MAC:[0][609c.9fde.1215]
                          2.2.2.2         0          100        0      BI
         AS_PATH:
         L2 Label: 2 (VNI)
         ESI : 00.000000000000000000