Displays rendezvous-point (RP)-set list for the device elected as the bootstrap router (BSR).
Privileged EXEC mode
The basic show ip pim rp-set command displays the following information:
|
Output Field |
Description |
|---|---|
|
Number of group prefixes |
The number of PIM Sparse group prefixes for which the RP is responsible. |
|
Group prefix |
Indicates the multicast groups for which the RP listed by the previous field is a candidate RP. |
|
RPs expected or received |
Indicates how many RPs were expected and received in the latest bootstrap message. |
|
RP num |
Indicates the RP number. If there are multiple RPs in the PIM Sparse domain, a line of information for each RP is listed, in ascending numerical order. |
|
priority |
The RP priority of the candidate RP. During the election process, the candidate RP with the highest priority is elected as the RP. |
|
age |
The age (in seconds) of this RP-set. |
|
holdtime |
Indicates the time in seconds for which this rp-set information is valid. If this rp-set information is not received from BSR within the holdtime period, the rp-set information is aged out and deleted. |
The following example shows the RP set list for the device elected as BSR.
device# show ip pim rp-set
Static RP
---------
Static RP count: 2
1.51.51.4
1.51.51.5
Number of group prefixes Learnt from BSR: 1
Group prefix = 224.0.0.0/4 # RPs: 2
RP 1: 1.51.51.1 priority=0 age=60 holdtime=150
RP 2: 1.51.51.3 priority=0 age=30 holdtime=150
The following example shows the RP set list for devices that are not elected as BSR.
device# show ip pim rp-set
Static RP
---------
Static RP count: 2
1.51.51.4
1.51.51.5
Number of group prefixes Learnt from BSR: 1
Group prefix = 224.0.0.0/4 # RPs expected: 2
# RPs received: 2
RP 1: 1.51.51.1 priority=0 age=60 holdtime=150
RP 2: 1.51.51.3 priority=0 age=30 holdtime=150