Specifying a TCAM profile

Follow these steps to specify a TCAM profile.

1. Enter global configuration mode.
   

   device# configure terminal

2. Enter the hardware command to enable hardware configuration mode.
   

   device(config)# hardware

3. Enter the profile tcam command to specify a TCAM profile.
   

   device(config-hardware)# profile tcam multicast-profile

4. Return to privileged EXEC mode.
   

   device(config-hardware)# end

5. Save the configuration.
   

   device# copy running-config startup-config

6. Enter the reload system command to reboot the device.
   

   device# reload system