clear bgp evpn routes

Syntax

clear bgp evpn routes type arp ip address mac mac address ethernet-tag tag-id

clear bgp evpn routes type ipv4-prefix ip address/mask

clear bgp evpn routes type ipv6-prefix ipv6 address/mask

clear bgp evpn routes type mac mac addressethernet-tag tag-id

clear bgp evpn routes type nd IPv6 address mac mac address ethernet-tag tag-id

clear bgp evpn routes type [ igmp-join-sync| igmp-leave-sync]

arp: Specifies address-resolution protocol (ARP) routes.
ip address: Specifies an IP address.
mac mac address: Specifies Media Access Control (MAC) routes and a MAC address. The valid format is HHHH.HHHH.HHHH.
ethernet-tag tag-id: Specifies an Ethenet tag. Valid values range from 1 through 4294967295.
ipv4-prefix: Specifies IPv4 prefix routes.
IPv4 address/mask: Specifies an IPv4 address and mask.
ipv6-prefix: Specifies IPv6 prefix routes.
IPv6 address/mask: Specifies an IPv6 address and mask.
mac: Specifies MAC routes.
nd: Specifies neighbor-discovery (ND) routes.
igmp-join-sync: Specifies Join Sync routes.
igmp-leave-sync: Specifies Leave Sync routes.

Privileged EXEC mode

This example clears all routes from the BGP EVPN route table.

device# clear bgp evpn routes

This example clears all ARP routes from the BGP EVPN route table.

device# clear bgp evpn routes type arp

This example clears a specified MAC route from the BGP EVPN route table.

device# clear bgp evpn routes type mac 000.abba.baba ethernet-tag 0

This example clears all Leave Sync routes from the BGP EVPN route table.

device# clear bgp evpn routes type igmp-leave-sync