show ipv6 ospf neighbor

Syntax

show ipv6 ospf neighbor [ all-vrfs | vrf vrf-name ]

show ipv6 ospf neighbor detail [ vrf vrf-name ]

show ipv6 ospf neighbor interface [ ethernet slot/port | loopback number | port-channel number | ve vlan_id ]

show ipv6 ospf neighbor router-id A.B.C.D [ vrf vrf-name ]

Parameters

all-vrfs: Specifies all VRF instances.
vrf vrf-name: Specifies a non-default VRF instance.
detail: Displays detailed neighbor information.
interface: Displays OSPFv3 interface information.
ethernet slot/port: Specifies an Ethernet slot and port.
loopback number: Specifies a loopback port number. Valid values range from 1 through 255.
port-channel number: Specifies a port-channel.
ve vlan_id: Specifies a virtual Ethernet (VE) interface. Valid values range from 1 through 4096.
router-id A.B.C.D: Specifies neighbor information for the specified router ID (in dotted decimal format).

Modes

Privileged EXEC mode

Examples

The following example shows sample output from the show ipv6 ospf neighbor command when no arguments or keywords are used.

device# show ipv6 ospf neighbor
Total number of neighbors in all states: 1
Number of neighbors in state Full      : 1

RouterID        Pri State  DR              BDR             Interface     State   QCount
1.4.4.4         1 Full     100.5.5.5       1.4.4.4         Eth 1/13      DR      0
device#

The following example shows sample output from the show ipv6 ospf neighbor detail command when no arguments or keywords are used.

device# show ipv6 ospf neighbor detail
Total number of neighbors in all states: 1
Number of neighbors in state Full      : 1

RouterID        Pri State  DR              BDR             Interface     State   QCount
1.4.4.4         1 Full     100.5.5.5       1.4.4.4         Eth 1/13      DR      0
                Option: 00-00-00    Timer: 692
BFD State: NONE, BFD HoldoverInterval(sec):Configured: 0 Current: 0
device#