show running-config rule

Syntax

show running-config rule [ index ]

show running-config rule index { action | command command_name | operation | role }

show running-config rule { action { reject | accept } | command command_name | operation { read-only | read-write } | role role-name }

Parameters

index: Displays the rule with the specified index number. Values range from 1 through 512.
action reject | accept: Following the index parameter, indicates whether reject or accept is specified for that rule. If the index parameter is not specified, displays all rules with the specified action.
command command_name: Displays rule configuration for the specified command. To display a list of supported commands, type a question mark (?). This list varies according to whether or not you specify a rule index.
operation read-only | read-write: Following the index parameter, indicates whether read-only or read-write is specified for that rule. If the index parameter is not specified, displays all rules with the specified operation.
role role-name: Displays rule configuration for the specified role.

Modes

Privileged EXEC mode

Examples

The following example displays the configured roles and their rules.

device# show running-config rule
 
rule 30 action accept operation read-write role NetworkSecurityAdmin
rule 30 command role
!
rule 31 action accept operation read-write role NetworkSecurityAdmin
rule 31 command rule
!
rule 32 action accept operation read-write role NetworkSecurityAdmin
rule 32 command username
!
rule 33 action accept operation read-write role NetworkSecurityAdmin
rule 33 command aaa
!
rule 34 action accept operation read-write role NetworkSecurityAdmin
rule 34 command radius-server
!
rule 35 action accept operation read-write role NetworkSecurityAdmin
rule 35 command configure

The following example displays a single rule.

device# show running-config rule 30
 
rule 30
 action accept operation read-write role NetworkSecurityAdmin command role