Enables configuring multiple endpoints on VPLS ports.
Router Interface context
This command enables multiple endpoint on the VPLS ports. Use this command after enabling routing on a BD and binding a router interface to the Bridge Domain. Use this command to enable configuring your Virtual Ethernet interface on a VPLS instance so that VE routing packets can reach remote VPLS endpoints.
This example turns on support of multiple endpoints on a VE interface.
SLX (config-terminal)# interface ve 100 SLX (config-router-interface-ve-100)# allow multi-ep-per-port
This example turns off the support of multiple endpoints on a VE interface.
SLX (config-terminal)# interface ve 100 SLX (config-router-interface-ve-100)# no allow multi-ep-per-port