Privileged EXEC mode
This command is supported only on SLX 9540 and SLX 9640 devices.
The following message appears when this command is executed:
WARNING: Hardware image will be upgraded and followed with a board-level power cycling. Do you want to continue?[y/n]:
After the FPGA is updated, the entire board is power-cycled.
The following example upgrades the firmware on an SLX 9540.
device# firmware peripheral-update fpga WARNING: Hardware image will be upgraded and followed with a board-level power cycling. Do you want to continue?[y/n]: y erasing \ ….. erasing .. ... done programming .......................... 25% ....... programming .......................... 25% .......................... 50% .......................... 75% .......................... 100% sysfpga image is upgraded successfully. device#