soft-preemption cleanup-timer
Syntax
soft-preemption
{
cleanup-timer
|
value
}
no soft-preemption
{
cleanup-timer
|
value
}
Command Default
The soft-preemption cleanup-timer is disables on the router.
Parameters
- cleanup-timer
value
- The
value is the time the point of preemptionmust wait to receive the path tear notification from the ingress LSR, before sending a hard preemption path error. Values ranging from 1 - 29 are not valid values for this timer. The default setting is 30 seconds. The acceptable range for this timer is 30 - 300. A value of 0 indicates soft preemption is disabled on the router.
Usage Guidelines
The
no function returns the timer value settings to the default setting (30 seconds).
MPLS is supported on the Extreme 8820, SLX 9740, SLX 9640, and SLX 9540 devices only.
Examples
The following example configures the soft-preemption cleanup-timer to 30 seconds, which is the default setting.
device# configure
device(config)# router mpls
device(config-router-mpls)# policy
device(config-router-mpls-policy)# soft-preemption cleanup-timer 30
