Privileged EXEC mode
Use this command to view configuration information and statistics for BGP EVPN neighbors of the device. Output shows all configured parameters for the neighbors.
device# show bgp evpn neighbors Total number of BGP Neighbors: 1 '+': Data in InQueue '>': Data in OutQueue '-': Clearing '*': Update Policy 'c': Group change 'p': Group change Pending 'r': Restarting 's': Stale '^': Up before Restart '<': EOR waiting 1 IP Address: 20.0.0.2, AS: 100 (IBGP), RouterID: 2.2.2.2, VRF: default-vrf State: ESTABLISHED, Time: 0h0m13s, KeepAliveTime: 60, HoldTime: 180 KeepAliveTimer Expire in 38 seconds, HoldTimer Expire in 171 seconds Minimal Route Advertisement Interval: 0 seconds RefreshCapability: Received GracefulRestartCapability: Sent Restart Time 120 sec, Restart bit 0 afi/safi 25/70, Forwarding bit 0 Address Family : L2VPN EVPN SendExtendedCommunity: yes Messages: Open Update KeepAlive Notification Refresh-Req Sent : 7 9 5 0 0 Received: 2 5 5 1 0 Last Update Time: NLRI Withdraw NLRI Withdraw Tx: 0h0m12s --- Rx: 0h0m12s --- Last Connection Reset Reason:Rcv Notification Notification Sent: Unspecified Notification Received: Cease/Administrative Reset Neighbor NLRI Negotiation: Peer Negotiated IPV4 unicast capability Peer Negotiated L2VPN EVPN address family Peer configured for IPV4 unicast Routes Peer configured for L2VPN EVPN address family Neighbor ipv6 MPLS Label Capability Negotiation: Neighbor AS4 Capability Negotiation: Outbound Policy Group: ID: 2, Use Count: 1 Byte Sent: 804, Received: 607 Local host: 20.0.0.1, Local Port: 8015 Remote host: 20.0.0.2, Remote Port: 179 Maintenance Mode : Disabled G-Shut: Disabled