Heartbeat monitoring must be enabled explicitly using the enable
command from
within this mode.
When this command is executed, an entry for this mode is created in the running-config.
SLX(config-management-heartbeat-manage)# do show running-config management-heartbeat manager management-heartbeat manager threshold-timer 5 action maintenance-mode-enable ! SLX(config-management-heartbeat-manage)#
The no
form of this command removes the management-heartbeat manager
configuration from the running-config.
SLX(config-management-heartbeat-manage)# do show running-config management-heartbeat manager management-heartbeat manager threshold-timer 5 action maintenance-mode-enable ! SLX(config-management-heartbeat-manage)# exit SLX(config)# SLX(config)# no management-heartbeat manager SLX(config)# SLX(config)# do show running-config management-heartbeat manager % No entries found. SLX(config)#
The following example changes the context to management-heartbeat-manage mode and lists all the commands within this context.
SLX# configure terminal Entering configuration mode terminal SLX(config)# management-heartbeat manager Possible completions: SLX(config)# management-heartbeat manager SLX(config-management-heartbeat-manage)# SLX(config-management-heartbeat-manage)# ? Possible completions: action Action taken by switch on expiration of threshold time describe Display transparent command information do Run an operational-mode command enable Enable manageability heartbeat in admin up state exit Exit from current mode help Provide help information no Negate a command or set its defaults pwd Display current mode path threshold-timer Threshold timer for heartbeat miss top Exit to top level and optionally run command SLX(config-management-heartbeat-manage)#