No bACL is applied.
Interface subtype configuration mode
Broadcast ACLs are not supported on SLX 9150 or SLX 9250 devices.
The no form of this command removes a bACL from the interface.
The following example applies a bACL to a physical interface.
device# configure terminal device(config)# interface ethernet 0/2 device(conf-if-eth-0/2)# ip subnet-broadcast-acl bacl_10
The following example applies a bACL to a VE.
device# configure terminal device(config)# interface ve 50 device(config-ve-50)# ip subnet-broadcast-acl bacl_20