The timeout parameters are not applied to the device.
Interface configuration mode
The no form of the command disables dot1x timeout.
The following example sets 25 seconds as the amount of time between reauthorization attempts on a specific interface.
device(config)# interface Ethernet 1/1 device(conf-if-eth-1/1)# dot1x timeout re-authperiod 25
The following example sets 45 seconds as the switch-to-client retransmission time for the EAP request frame on a specific interface.
device(config)# interface Ethernet 1/1 device(conf-if-eth-1/1)# dot1x timeout supp-timeout 45
The following example sets 34 seconds as the waiting period for a response to an EAP-request or identity frame from the client before retransmitting the request on a specific interface.
device(config)# interface Ethernet 1/1 device(conf-if-eth-1/1)# dot1x timeout tx-period 34