The command is disabled, by default.
MPLS policy configuration mode.
To collect accurate statistics of the bypass LSP, it is necessary to configure ingress tunnel accounting at Label Switch Routers (LSR).
The no form of the command disables the configuration.
MPLS is supported on the Extreme 8820, SLX 9740, SLX 9640, and SLX 9540 devices only.
The example below is a sample configuration for the command.
device# configure device(config)# router mpls device(config-router-mpls)# policy device(config-router-mpls-policy) ingress-tunnel-accounting