The default port used by the Keylime agent is 9002.
This example shows the complete configuration of Remote Attestation on this SLX device.
SLX # configure terminal SLX (config)# remote-attestation SLX (config-remote-attestation)# registrar-server 10.1.1.10 use-vrf default-vrf SLX (config-remote-attestation-10.1.1.10/default-vrf)# registrar-port SLX (config-remote-attestation-10.1.1.10/default-vrf)# exit SLX (config-remote-attestation)# agent-port 3333 agent-uuid UUID-F96FCC9E agent-enable SLX (config-remote-attestation)# exit SLX (config)# exit SLX #
This command and mode is only available on the Extreme 8720 and Extreme 8520 devices.