raslog-duration

Syntax

raslog-duration {minutes }

no raslog-duration

See the Usage Guidelines.

minutes: Message interval in minutes. Range is from 10 through 1440. The default is 10.

Protocol Loop Detection configuration mode

Use the no form of this command to revert to the default interval.

To specify a RASLog message interval of 20 minutes:

device# configure terminal
device(config)# loop-detection
device(config-loop-detect)# raslog-duration

To revert to the default interval:

device# configure terminal
device(config)# loop-detection
device(config-loop-detect)# no raslog-duration 20