map bridge-domain (overlay gateway)
Syntax
map bridge-domain
bridge_domain_id
vni vni
no map bridge-domain
bridge_domain_id
vni vni
Parameters
- bridge_domain_id
- Specifies a bridge domain.
- vni vni
- Specifies a VNI. Enter an integer from 1 through 16777215.
Modes
Overlay gateway configuration mode
Usage Guidelines
Use the
no form of this command to remove the mapping.
Examples
The following example maps a bridge domain to a VNI.
device# configure terminal
device(config)# overlay-gateway gateway1
device(config-overlay-gw-gateway1)# map bridge-domain 1 vni 999