Static Prefix Independent Convergence (Static PIC) is not enabled by default.
Global configuration mode
When static PIC is enabled, both primary and backup next-hop static routes are downloaded to the device. When static PIC is not enabled, only the primary next-hop static route is downloaded.
You must run the clear ip route all vrf <vrf-name> or the IPv6 version of the command when changing static PIC configuration.
This example configures static PIC.
SLX(config)# prefix-independent-convergence-static %Warning: Please run "clear ip[v6] route all vrf <vrf name>" for all static routes configured in VRFs
This examples removes the configuration of static PIC.
SLX (config)# no prefix-independent-convergence-static