Privileged EXEC mode
IS-IS is supported on the Extreme 8820, SLX 9740, SLX 9640, and SLX 9540 devices only.
If leaked subnet routes are present, that information displays in the output.
device# show ip route vrf mgmt-vrf
IP Routing Table for VRF "mgmt-vrf"
Total number of IP routes: 3
'*' denotes best ucast next-hop
'[x/y]' denotes [preference/metric]
0.0.0.0/0
*via 10.25.96.1, mgmt 1, [1/1], 8d15h, static, tag 0
10.25.96.0/22, attached
*via DIRECT, mgmt 1, [0/0], 8d15h, direct, tag 0
10.25.96.38/32, attached
*via DIRECT, mgmt 1, [0/0], 8d15h, local, tag 0
The following example displays output for the system-summary option.
device# show ip route system-summary System Route Count: 3 Max routes: 4096 (Route limit not exceeded) System Nexthop Count: 2 Max nexthops: 1024 (Nexthop limit not exceeded) VRF-Name: default-vrf Route count: 0 Max routes: Not Set (Route limit not exceeded) 0 connected, 0 static, 0 RIP, 0 OSPF, 0 BGP, 0 ISIS, 0 unnumbered VRF-Name: mgmt-vrf Route count: 3 Max routes: Not Set (Route limit not exceeded) 1 connected, 1 static, 0 RIP, 0 OSPF, 0 BGP, 0 ISIS, 0 unnumbered
The following example displays output for the connected option.
device# show ip route connected
Type Codes - B:BGP D:Connected I:ISIS O:OSPF R:RIP S:Static; Cost - Dist/Metric
BGP Codes - i:iBGP e:eBGP
ISIS Codes - L1:Level-1 L2:Level-2
OSPF Codes - i:Inter Area 1:External Type 1 2:External Type 2 s:Sham Link
Destination Gateway Port Cost Type Uptime
1 1.1.1.0/24 DIRECT Te 2/1 0/0 D 4m33s
2 1.1.2.0/24 DIRECT Te 2/2 0/0 D 2m42s
The following example displays output for the summary option.
device# show ip route summary IP Routing Table - 7 entries: 8 direct, 0 static, 0 RIP, 0 OSPF, 8 BGP, 0 ISIS, 80 EVPN Host Number of prefixes: /24: 7 Nexthop Table Entry - 4 entries
The following example displays output for the nexthop option.
device# show ip route nexthop
Total number of IP nexthop entries: 4; Forwarding Use: 4
NextHopIp Port RefCount ID Age
1 1.1.1.2 Te 2/1 3/3 2147549184 277
2 0.0.0.0 Te 2/2 1/1 2147484008 191
3 0.0.0.0 Te 2/1 2/2 2147484009 302
4 1.1.1.2 Te 2/1 1/1 2147549185 190
1.1.2.2 Te 2/2
The following example displays output for a specific next-hop ID option.
device# show ip route nexthop 2147549184
NextHopIp Port RefCount ID Age
1 1.1.1.2 Te 2/1 3/3 2147549184 288
The following example displays output for the ref-routes option.
device# show ip route nexthop 2147549184 ref-routes
Type Codes - B:BGP D:Connected I:ISIS O:OSPF R:RIP S:Static; Cost - Dist/Metric
BGP Codes - i:iBGP e:eBGP
ISIS Codes - L1:Level-1 L2:Level-2
OSPF Codes - i:Inter Area 1:External Type 1 2:External Type 2 s:Sham Link
Destination Gateway Port Cost Type Uptime
1 100.1.1.0/24 1.1.1.2 Te 2/1 1/1 S 5m10s
2 100.1.2.0/24 1.1.1.2 Te 2/1 1/1 S 4m54s
3 100.1.3.0/24 1.1.1.2 Te 2/1 1
The following example displays output for a specific IP address.
device# show ip route 100.1.1.1
Type Codes - B:BGP D:Connected I:ISIS O:OSPF R:RIP S:Static; Cost - Dist/Metric
BGP Codes - i:iBGP e:eBGP
ISIS Codes - L1:Level-1 L2:Level-2
OSPF Codes - i:Inter Area 1:External Type 1 2:External Type 2 s:Sham Link
Destination Gateway Port Cost Type Uptime
4 100.1.1.0/24 1.1.1.2 Te 2/1 1/1 S 5m37s
The following example displays output for the longer option.
device# show ip route 100.0.0.0/8 longer
1 100.1.1.0/24 1.1.1.2 Te 2/1 1/1 S 14m37s
2 100.1.2.0/24 1.1.1.2 Te 2/1 1/1 S 14m21s
3 100.1.3.0/24 1.1.1.2 Te 2/1 1/1 S 14m18s
4 100.2.1.0/24 DIRECT Te 2/1 1/1 S 14m2s
5 100.3.1.0/24 1.1.1.2 Te 2/1 1/1 S 13m10s
100.3.1.0/24 1.1.2.2 Te 2/2 1/1 S 13m10s