LACP PDUs received on an interface where LACP is not configured are discarded.
Interface subtype configuration mode
LACP PDUs are forwarded only when they are received on a physical interface or static port channel interface. LACP PDUs cannot be forwarded if they are received on a LACP based dynamic port channel.
LACP PDU forwarding enabled on a static port channel applies to all the member ports.
When LACP is enabled on a port, it overrides LACP PDU forwarding configuration and the PDUs are trapped to CPU.
Enabling and disabling of BPDU drop on a bridge domain does not impact LACP PDU forwarding.
Use the no form of the command to disable LACP PDU forwarding.
The following example configures LACP PDU forwarding on a physical interface.
device# configure terminal device(config)# interface ethernet 4/1 device(conf-if-eth-4/1)# lacp-pdu-forward enable
The following example configures LACP PDU forwarding on a static port channel interface.
device# configure terminal device(config)# interface port-channel 10 device(config-Port-channel-10)# lacp-pdu-forward enable