clear mpls lsp
Syntax
clear mpls lsp
lsp_name
[
primary
|
secondary
]
Parameters
- lsp_name
- Specifies the target LSP by name.
- primary
- Specifies that the primary LSP path associated with the
lsp_name
is reset and restarted.
- secondary
- Specifies that the secondary LSP path associated with the
lsp_name
is reset and restarted.
Modes
Privileged EXEC mode
Usage Guidelines
MPLS is supported on the Extreme 8820, SLX 9740, SLX 9640, and SLX 9540 devices only.
Examples
When the user resets an LSP with the clear mpls lsp command, the following information message is displayed.
"Disconnecting signaled LSP name"
"Connecting signaled LSP name"