Before you begin
Create basic DHCP Server and Relay settings.
About this task
Use this task to configure each of the required parameters that the DHCP server will
return to clients, along with an IP address.
Procedure
-
Enter the IP address of the
Default Gateway for the subnet to which the addresses
in the IP pool belong.
-
Enter the primary DNS server IP
address for clients to contact when resolving domain names to IP
addresses.
-
Enter the secondary DNS server IP
address for clients to contact when resolving domain names to IP
addresses.
-
Enter the tertiary DNS server IP
address for clients to contact when resolving domain names to IP
addresses.
-
Enter the POP3 server IP
address for clients to use.
-
Enter the SMTP server IP
address for clients to use.
-
Enter the primary WINS server IP
address for clients to use.
-
Enter the seconday WINS server IP
address for clients to use.
-
For Lease Time, enter the length of time for the DHCP
lease to last.
-
Enter the Netmask that defines the subnet to which the
addresses in the IP pool belong.
-
Enter the DNS name resolution Domain Name to assign to
DHCP clients.
-
Set the path MTU aging timeout in seconds for clients to
use.
-
Enter the primary NTP server IP
address for DHCP client clock synchronization.
-
-
Enter the secondary NTP server IP
address for DHCP client clock synchronization.
-
Enter the Log Server IP
address for DHCP clients.
What to do next
Save the configuration or continue to Custom settings.
